Kia Sportage: Fuel Pressure Control Valve: Repair procedures
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the fuel pressure regulator valve connector. |
3. |
Measure resistance between the fuel pressure regulator valve terminals 1 and 2. |
4. |
Check that the resistance is within the specification.
Specification: Refer to “Specification”
|
|
Refer to "High Pressure Fuel Pump" in this group.
Refer to "High Pressure Fuel Pump" in this group.
Desrcription
The Electric WGT Control Actuator is installed on the turbocharger.
It operates the vain in the Waste Gate Turbocharger (WGT) and
regulates the compressed air amount by the ECM''s P ...
Other Information:
Intake Manifold: Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Remove the ai ...
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts.The purpose of the pre-tensioner is to make sure that the seat belts fit tightly
against the occupan ...