Kia Sportage: Filler-Neck Assembly: Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Fuel Delivery System / Filler-Neck Assembly: Repair procedures
| Removal |
| 1. |
Remove the rear-LH wheel, tire, and the inner wheel house. |
| 2. |
Disconnect the fuel filler hose (A) and the ventilation hose (B).
|
| 3. |
Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
|
| 4. |
Remove the filler-neck assembly from the vehicle after removing the bracket mounting nut (A).
|
| Installation |
| 1. |
Installation is reverse of removal.
|
Fuel Pump: Repair procedures
Inspection
[Fuel pump]
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump assembly.
3.
Check motor operation by fuel pump connector (A) connecti ...
Accelerator Pedal: Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the installation nuts (B), th ...
Other Information:
Owner maintenance schedule
When you stop for fuel:
Check the engine oil level.
Check the coolant level in the coolant reservoir.
Check the windshield washer fluid level.
Look for low or under-inflated tires.
WA ...
Power Door Mirror Actuator: Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door delta cover.
(Refer to the BD group - "Front door")
3.
Disconnect the connector from the door mirror.
...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024