Kia Optima Manuals

Kia Sportage: Troubleshooting - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Troubleshooting

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Troubleshooting

Troubleshooting
Trouble symptom
Suspect area
Remedy 
Shift delay
Breakdown of clutch or brake
Faulty hydraulic control
Faulty hydraulic supply
?
?
?
Clutch, Brake
Solenoid valve, Valve body
Mechanical oil pump
Cleanliness of automatic transaxle fluid (foreign material)
Automatic transaxle fluid level
Vibration of the vehicle, when the shifting
Shift shock 
?
?
?
?
?
?
Damaged of clutch or brake
Faulty hydraulic control
Faulty hydraulic supply
Faulty transaxle mounting
Faulty speed sensor
Faulty Harness
Damaged connector & wiring


Clutch, Brake
Solenoid valve, Valve body
Mechanical oil pump
Cleanliness of automatic transaxle fluid (foreign material)
Automatic transaxle fluid level
Speed sensor and connector
Harness & connector of transaxle
Connector & wiring of vehicle
Fixed gear
(shift impossible)
Faulty solenoid valve
Faulty TCM software program
?
?
?
?
?
?
?
Clutch, Brake
Solenoid valve, Valve body
Mechanical oil pump
Cleanliness of automatic transaxle fluid (foreign material)
Automatic transaxle fluid level
Speed sensor and connector
Harness & connector of transaxle
Connector & wiring of vehicle
limited gear
(shift possible)
Faulty inhibitor switch
Faulty hydraulic supply
?
Inhibitor switch & connector
Connector & wiring of vehicle
Power
Driving impossible
Faulty CAN Communication
CAN Communication line
TCM, ECM
Power
Poor acceleration
Faulty hydraulic control
Faulty hydraulic supply
?
?
?
?
?
Solenoid valve, Valve body
Mechanical oil pump
Cleanliness of automatic transaxle fluid (foreign material)
Automatic transaxle fluid level
Connector & wiring of vehicle
Power

Special Service Tools
Special Service Tools Tool Name / NumberIllustrationDescriptionEngine support fixture (bar)09200-3N000Used for holding engine assembly when removing / installing transaxleUsed with the supporter ...

Automatic Transaxle System
...

Other Information:

Overhead Console Lamp: Repair procedures
Inspection Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. No.DescriptionNo.Descrip ...

Fan speed control
The ignition switch must be in the ON position for fan operation. The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan ...

Categories


Copyright © www.kispmanual.com 2014-2024