Kia Sportage: Description and Operation

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Hydraulic System / Description and Operation

Description

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves).

The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels.

The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Hydraulic System

...

Components and Components Location

Components Location 1. Automatic transaxle2. Valve body assembly3. Oil pump assembly ...

Other Information:

Rear Shock Absorber: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage to the hub bol ...

Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perf ...

Kia Sportage: Description and Operation

Hydraulic System

Components and Components Location

Other Information:

Categories