Inspection |
1. |
Check signal waveform of Input & output speed sensor using the GDS.
|
Removal |
1. |
Remove the valve body assembly.
(Refer to "Valve Body" in Hydraulic System of this group) |
2. |
Disconnect the input & output speed sensor connector (A) from the main wiring. |
3. |
Remove the input & output speed sensor (B) after removing the bolts(2ea).
|
Installation |
1. |
Install in the reverse order of removal.
|
Smart key
With a smart key, you can lock or unlock a door (and tailgate) and even start
the engine without inserting the key.
The functions of the buttons on a smart key are similar to the remote keyless
...
Glove box cooling
You can keep beverage cans or other items cool using the open/close lever of
the vent installed in the glove box.
1.Turn on the air conditioning (A/C) system.
2.Move the open/close lever (1) of ...