Kia Sportage: Output Speed Sensor: Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Output Speed Sensor: Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor: Specifications

Specifications
? Type: Hall effect sensor
Operation condition (°C)°F
(-40~150) -40~302
Air gap (mm)in.
(0.25~0.70) 0.0098~0.0276
Output voltage (V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Output Speed Sensor: Description and Operation
Description The Output Speed Sensor is a vital unit that measures the rate of rotation of the transmission''s turbine shaft and output shaft, and delivers the readings to the TCM. ...

Output Speed Sensor: Schematic Diagrams
Circuit Diagram ...

Other Information:

Underbody maintenance
Corrosive materials used for ice and snow removal and dust control may collect on the underbody. If these materials are not removed, accelerated rusting can occur on underbody parts such as the fu ...

Repair procedures
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continu ...

Categories


Copyright © www.kispmanual.com 2014-2024