Torque converter control solenoid valve (T/CON_VFS) is
attached to the valve body. This variable force solenoid valve directly
controls the hydraulic pressure inside the torque converter.
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the valve body assembly.
(R ...
Specifications
Direct control VFS[T/CON]
? Control type : Normal low type
Control Pressure kpa (kgf/cm?, psi)9.81 ~ 500.14(0.1 ~ 5.1,1.42 ~ 72.54)Current value(mA)50 ~ 850 Internal resist ...
Other Information:
Repair procedures
Inspection
1.
Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
2.
Check for continuity between the terminals.
3.
If continu ...
Valve Clearance Adjustment
Valve Clearance Inspection And Adjustment
Inspect and adjust the valve clearance when the engine is
cold (Engine coolant temperature : 20°C (68°F)) and cylinder head ...