Inspection |
1. |
Turn ignition switch OFF. |
2. |
Remove the air duct (A). |
3. |
Remove the air cleaner assembly.
|
4. |
Disconnect the solenoid valve connector (A). |
5. |
Measure resistance between sensor signal terminal and ground terminal. |
6. |
Check that the resistance is within the specification. |
Removal |
1. |
Remove the under cover (A).
|
2. |
Remove the drain plug (A) and drain the ATF totally and then reinstall the drain plug.
|
3. |
Remove the air duct (A). |
4. |
Remove the air cleaner assembly.
|
5. |
Disconnect the clip (A) from the valve body cover. |
6. |
Remove the air breather hose (A). |
7. |
Remove t he valve body cover (B).
|
8. |
Remove the solenoid valve connector (B) and the oil temperature sensor (A). |
9. |
Remove the solenoid valve support bracket (B) and the valve body mounting bolt (A-1ea).
|
10. |
Remove the torque converter control solenoid valve (A). |
Installation |
1. |
Install in the reverse order of removal.
|
Components and Components Location
Components
1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring4. Seat Belt Pretensioner (BPT)5. Pressure Side Impact Sensor (P-SIS)6. Side Impact Sensor (SIS)7. Side Airbag (SAB)8. Passenger A ...
Rear
9. Door
10. Fuel filler lid
11. Rear combination lamp
12. Tailgate (trunk)
13. Rear wiper blade
14. Center high mounted stop light
15. Rear window defroster
16. Antenna ...