Inspection |
If you have trouble code related to the oil hydraulic
motor(actuator) (P1825, P1826, P1827, P1828), check oil hydraulic motor
(actuator) according to the inspection process.
|
Oil Hydraulic Motor (Actuator) Inspection Procedure |
Removal |
1. |
Remove the coupling assembly.
(Refer to "coupling assembly" in 4WD group) |
2. |
Keep going perpendicular state after remove the coupling assembly.
|
3. |
Remove the hydraulic motor (actuators) after loosening bolts with hex wrench.
|
Installation |
1. |
Before installation, wipe the surface with a clean cloth. |
2. |
Check the O-rings of the new hydraulic motor (actuators).
|
3. |
Tighten the bolts after install the hydraulic motor (actuators).
|
4. |
Wipe the flowed oil to around the surface with a clean cloth. |
5. |
Measure the weight of the coupling.
|
Purge Control Solenoid Valve (PCSV): Schematic Diagrams
Circuit Diagram
...
Special Service Tools
Special Service Tools
Tool Name / NumberIllustrationDescriptionEngine support fixture (bar)09200-3N000Used for holding engine assembly when removing / installing transaxleUsed with the supporter ...