Inspection |
If you have trouble code related to the pressure sensor
(P1825, P1826, P1827, P1828), check pressure sensor according to the
inspection process.
|
Pressure Sensor Inspection Procedure |
Measure the resistance of pressure sensor |
1. |
Turn ignition switch OFF. |
2. |
Disconnect the pressure sensor connector. |
3. |
Measure resistance between sensor terminal and terminal. |
4. |
Check the measured resistance. (Refer to table)
|
Removal |
1. |
Remove the coupling assembly.
(Refer to "coupling assembly" in 4WD group) |
2. |
Remove the extension Cable (A). |
3. |
Remove the pressure sensor (A) with 24mm socket.
|
Installation |
|
1. |
Installation is the reverse of removal. |
Power windows
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window. The driver
has a power window lock button which ...
TPMS Receiver: Schematic Diagrams
Schematic Diagrams
TPMS Receiver Circuit Diagram
Harness Connector
PinDescription1Battery2CAN_High3GND4-5-6-7IGN8CAN_Low9-10-11-12-
...