Kia Sportage: Front Driveshaft: Components and Components Location - Driveshaft Assembly - Driveshaft and axle - Kia Sportage SL Service & Repair ManualKia Sportage: Front Driveshaft: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Driveshaft and axle / Driveshaft Assembly / Front Driveshaft: Components and Components Location

Components

1. Front driveshaft (LH)
2. inner shaft
3. Front driveshaft (RH)

1. Split pin
2. Castle nut
3. washer
4. BJ assembly
5. Clip A
6. BJ boot band
7. BJ boot
8. Dynamic damper band
9. Dynamic damper
10. Shaft
11. VTJ boot band
12. VTJ boot
13. Spider assembly
14. Circlip
15. VTJ housing

1. Split pin
2. Castle nut
3. Washer
4. BJ assembly
5. Clip A
6. BJ boot band
7. BJ boot band
8. Dynamic damper band
9. Dynamic damper
10. Shaft
11. VTJ boot band
12. VTJ boot
13. Spider assembly
14. Circlip
15. VTJ housing

Driveshaft Assembly
...

Front Driveshaft: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.3 ~ ...

Other Information:

Brake Pedal: Repair procedures
Removal 1. Remove the crash pad lower panel and reinforcement panel. (Refer to the Body group- crash pad). 2. Pull down steering column shaft after removing bolts and nuts. 3. Disconnect t ...

Positive Crankcase Ventilation (PCV) Valve: Repair procedures
Removal 1. Disconnect the vapor hose (A). 2. Remove the PCV valve (B). Inspection 1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger move ...

Categories


Copyright © www.kispmanual.com 2014-2024