Kia Optima Manuals

Kia Sportage: Trailing Arm: Repair procedures - Rear Suspension System - Suspension System - Kia Sportage SL Service & Repair ManualKia Sportage: Trailing Arm: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Suspension System / Rear Suspension System / Trailing Arm: Repair procedures

Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
Be careful not to damage to the hub bolts when removing the front wheel & tire (A).
2.
Loosen the nuts & bolts and then remove the trailing arm (A) from the rear axle.
Tightening torque
34.3 ~ 53.9N.m (3.5 ~ 5.5kgf.m, 25.3 ~ 39.8lb-ft)
[2WD]

[4WD]

3.
Loosen the parking brake cable bracket bolt (A) & height sensor bracket bolt (B).
[2WD]

[4WD]

4.
Loosen the mounting bolt and then remove the trailing arm (A) with the frame.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

5.
Installation is the reverse of removal.
Rear Assist Arm: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bo ...

Rear Cross Member: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bo ...

Other Information:

Infant or small child
You should be aware of the specific requirements in your country. Child and/or infant seats must be properly placed and installed in the rear seat. For more information about the use of these rest ...

Components and Components Location
Component Location 1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. SJB (Smart Junction Box)6. BCM (Body Control Module) ...

Categories


Copyright © www.kispmanual.com 2014-2024