Removal |
|
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
Remove the air duct (A) and air cleaner assembly (B). (Driver front impact sensor only) |
3. |
Disconnect the front impact sensor connector (A). |
4. |
Remove the front impact sensor mounting bolt (B). |
5. |
Remove the front impact sensor. |
Installation |
|
1. |
Install the new front impact sensor. |
2. |
Tighten the front impact sensor mounting bolt.
|
3. |
Connect the front impact sensor connector. |
4. |
Install the air duct and air cleaner assembly. (Driver front impact sensor only) |
5. |
Reconnect the battery negative cable. |
6. |
After installing the Front Impact Sensor, confirm proper system operation:
|
Weight of the trailer tongue
The tongue load of any trailer is an important weight to measure because it affects
the total gross vehicle weight (GVW) of your vehicle. This weight includes the curb
weight of the vehicle, any ...
SRS Care
The SRS is virtually maintenancefree and so there are no parts you can safely
service by yourself. If the SRS air bag warning light does not illuminate, when
you turn the ignition on, or continuou ...