Removal |
Pressure Side Impact Sensor |
|
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
Remove the front door trim. (Refer to the Body group- Front door) |
3. |
Disconnect the front side impact sensor connector (A) and remove the front side impact sensor mounting screws (B). |
4. |
Remove the screw grommets (A). |
1. |
Disconnect the battery negative cable and wait for at least three minutes before beginning work. |
2. |
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pins (A) as arrow direction. And then remove the seat
belt after pushing the lock pin (B). |
3. |
Remove the door scuff trim. (Refer to the Body group - Interior trim) |
4. |
Remove the center pillar trim. (Refer to the Body group - Interior trim) |
5. |
Disconnect the side impact sensor connector (A). |
6. |
Loosen the side impact sensor mounting bolt (B) and remove the side impact sensor. |
Installation |
Pressure Side Impact Sensor |
|
1. |
Install the screw grommets (A).
|
2. |
Install the new front side impact sensor with the screws then connect the pressure side impact sensor connector.
|
3. |
Install the front door trim. (Refer to the Body group- Front door) |
4. |
Insert the seat belt to the anchor pretensioner.
|
5. |
Reconnect the battery negative cable. |
6. |
After installing the front side impact sensor, confirm proper system operation:
|
|
1. |
Install the new side impact sensor with the bolt then connect the side impact sensor connector.
|
2. |
Install the center pillar trim (Refer to the Body group - Interior tirm) |
3. |
Install the door scuff trim. (Refer to the Body group - Interior tirm) |
4. |
Insert the seat belt to the anchor pretensioner. |
5. |
Reconnect the battery negative cable. |
6. |
After installing the Side Impact Sensor, confirm proper system operation:
|
USING THE iPod® DEVICE
Some iPod® models may not support communication protocol and files may not
properly play. Supported iPod® models:
- iPhone® 3GS/4
- iPod® "Touch" 1st~4th generation
- iPod® " ...
Rear Parking Assist System Control Unit: Description and Operation
Description
When reversing, the driver is not easy to find objects in the
blind spots and to determine the distance from the object. In order to
provide the driver safety and convenience, back ...