Kia Sportage: Seat Belt Buckle Switch (BS): Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS): Repair procedures
| Removal |
| 1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
| 2. |
Remove the front seat assembly. (Refer to the Body group- Front seat) |
| 3. |
Loosen the seat belt buckle mounting bolt and remove the seat belt buckle switch.
|
| Installation |
Be sure to install the harness wires not to be pinched or interfered with other parts. |
| 1. |
Remove the ignition key from the vehicle. |
| 2. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
| 3. |
Install the seat belt buckle switch.
|
| 4. |
Install the front seat assembly. . (Refer to the Body group- Front seat) |
| 5. |
Reconnect the battery negative cable. |
| 6. |
After installing the seat belt buckle switch, confirm proper system operation:
|
Passive Occupant Detection System (PODS): Description and Operation
Description
The system is intended to classify the occupancy status of
the front passenger seat in a motor vehicle based upon the measured
force on the bottom seat cushion.
The system also com ...
Other Information:
Description and Operation
Description
The 6-speed automatic transaxle consists of an overdrive
clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B),
an underdrive brake (UD/B), a 26 brake (26/B), and ...
One person per belt
Two people (including children) should never attempt to use a single seat belt.
This could increase the severity of injuries in case of an accident. ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024