Kia Sportage: Side Airbag (SAB) Module: Description and Operation - Airbag Module - Restraint - Kia Sportage SL Service & Repair ManualKia Sportage: Side Airbag (SAB) Module: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Restraint / Airbag Module / Side Airbag (SAB) Module: Description and Operation

Description
The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.
   
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
Passenger Airbag (PAB) Module: Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 2. Remove the crash pad garnish. (Refer to the Body group- crash pad). 3. Disco ...

Side Airbag (SAB) Module: Components and Components Location
Components ...

Other Information:

SS-B Solenoid Valve(ON/OFF): Description and Operation
Description SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

Special Service Tools
Special Service Tools Tool (Number and name)IllustrationUseAlternator pulley remover wrench(09373-27000)Removal and installation of alternator pulley ...

Categories


Copyright © www.kispmanual.com 2014-2024