Removal |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Remove the floor console upper cover. |
3. |
Disconnect the yaw rate & lateral & Longitudinal G sensor connector (A). |
4. |
Remove the mounting bolts (B).
|
5. |
Installation is the reverse of removal. |
Fob Holder: Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the floor console.
(Refer to the BD group - "Console")
3.
Disconnect the connector (B), then remove the fob holder assemb ...
Front Impact Sensor (FIS): Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impac ...