Kia Sportage: Fender: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body (Interior and Exterior) / Exterior / Fender: Repair procedures

Replacement

•	When removing and installing the fender, an assistant is necessary.

•	Be careful not to damage the fender and body.

•	When removing the clips, use a clip remover.

1.	Remove the front bumper cover. (Refer to the BD group – “Front bumper”)

2.	Loosen the mud guard (A) mounting screws and clips.

3.	After loosening the mounting screws and clips, then remove the side sill moulding (A).

4.	Detach the clips and then remove the insulator pad (A).

5.	After loosening the mounting screw and bolt, then remove the front bumper side mounting bracket (A).

6.	After loosening the mounting bolts, then remove the fender (A).

7.	Installation is the reverse of removal.

Hood: Repair procedures

Replacement Hood Assembly Replacement • When removing and installing the hood, an assistant is necessary. • Take care not to damaged the hood and bo ...

Other Information:

Brake Booster: Repair procedures
Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depress ...

Windows
(1) Driver’s door power window switch (2) Front passenger’s door power window switch (3) Rear door (left) power window switch (4) Rear door (right) power window switch (5) Window opening and clo ...

Kia Sportage: Fender: Repair procedures

Exterior

Hood: Repair procedures

Other Information:

Categories