Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the cluster fascia panel.
(Refer to the BD group - "Crash pad") |
3. |
Disconnect the connector (A). |
4. |
Remove the start/stop button (A) after loosening the mounting 3 screws. |
Installation |
1. |
Install the start/stop button. |
2. |
Install the left air vent. |
In case of an emergency while driving
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N
(Neutral) position and then push the vehicle to a safe place.
If you h ...
Smart key precautions
If you lose your smart key, you will not be able to start the engine. Tow
the vehicle, if necessary, and contact an authorized Kia dealer.
A maximum of 2 smart keys can be registered to a sing ...