Component |
No. | Pin Name | Type | From | To | Description (Wiring Spec.) |
1 | GND | DC Ground | TMU | Battery | Connected to battery ground |
2 | GND | DC Ground | TMU | Battery | Connected to battery ground |
3 | - | - | - | - | - |
4 | - | - | - | - | - |
5 | - | - | - | - | - |
6 | - | - | - | - | - |
7 | - | - | - | - | - |
8 | - | - | - | - | - |
9 | - | - | - | - | - |
10 | - | - | - | - | - |
11 | - | - | - | - | - |
12 | HS CAN (-) | Data I/O | BUS | BUS | High Speed CAN bus low |
13 | HS CAN (+) | Data I/O | BUS | BUS | High Speed CAN bus high |
14 | - | - | - | - | - |
15 | - | - | - | - | - |
16 | - | - | - | - | - |
17 | - | - | - | - | - |
18 | V battery 1 | DC Input | Battery | TMU | DC level input from battery Supply power to TMU |
19 | Ignition 1 | Data Input | Junction Box | TMU | Vehicle Key mode status |
20 | ACC | Data Input | Junction Box | TMU | Vehicle Key mode status |
21 | Airbag | Data Input | ACU | TMU | Airbag status data from ACU |
22 | - | - | - | - | - |
23 | - | - | - | - | - |
24 | - | - | - | - | - |
25 | - | - | - | - | - |
26 | - | - | - | - | - |
27 | Speed | Data Input | - | TMU | GPS Calibration (UVO ONLY) |
28 | - | - | - | - | - |
29 | - | - | - | - | - |
30 | - | - | - | - | - |
31 | MM CAN (-) | Data I/O | BUS | BUS | Low Speed CAN bus low |
32 | MM CAN (+) | Data I/O | BUS | BUS | Low Speed CAN bus high |
To defog inside windshield
1.Set the fan speed to the desired position.
2.Select desired temperature.
3.Select the or
position.
4.The outside (fresh) air will be selected automatically. If the
position is selected, ai ...
Check battery and cables
Winter puts additional burdens on the battery system. Visually inspect the battery
and cables as described in section 7. The level of charge in your battery can be
checked by an authorized Kia dea ...