Removal |
|
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad garnish (A) after loosening the screw. |
3. |
Remove the MTS unit (A) after loosening the mounting bolts. |
Installation |
1. |
Install the MTS unit. |
2. |
Install the crash pad garnish. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
After replacing the TMU unit, access Dealer Engineering Mode in head unit.
(Refer to MTS system - "TMU Dealer Engineering Mode") |
2. |
Check the TMU version ("App S/W") from the head unit screen.
[Audio type]
[AVN type] |
3. |
Check the H/U Type from the head unit screen.
[Audio type]
[AVN type] |
4. |
Check the Model from the head unit screen.
[Audio type]
[AVN type] |
Exhaust Manifold: Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Disconnect t ...
Hill-start assist control (HAC)
A vehicle has the tendency to roll back on a steep hill when it starts to go
after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling
back by applying the brakes autom ...