Replacement |
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the nuts & bolts and then remove the trailing arm (A) from the rear axle.
[2WD]
[4WD] |
3. |
Loosen the parking brake cable bracket bolt (A) & height sensor bracket bolt (B).
[2WD]
[4WD] |
4. |
Loosen the mounting bolt and then remove the trailing arm (A) with the frame.
|
5. |
Installation is the reverse of removal. |
Injector: Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the injector terminals 1 and 2.
4.
Check that the resistance is within t ...
Electrochromic Mirror (ECM)
The electric rearview mirror automatically controls the glare from the headlights
of the vehicles behind you in nighttime or low light driving conditions. The sensor
mounted in the mirror senses t ...