Transaxle oil temperature sensor monitors the automatic
transaxle fluid''s temperature and conveys the readings to TCM. It is an
NTC (Negative Thermal Coefficient) sensor whose resistance has an
inversely proportional relationship with the temperature level. Data
produced by this sensor is used to identify damper clutch activation and
deactivation zones within the low temperature and high temperature
range and to compensate hydraulic pressure levels during gear changes.
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side
check point. ...
Specifications
? Type: Negative Thermal Coefficient Type
Temp.[(°C)°F]Resistance (k?)(-40)-4048.1(-20)-4.015.6(0)32.05.88(20)68.02.51(40)104.01.11(60)140.00.61(80)176.00.32(100)212.00.18(120)248 ...
Other Information:
Low fuel level warning light
This warning light indicates the fuel tank is nearly empty. When it comes on,
you should add fuel as soon as possible. Driving with the fuel level warning light
on or with the fuel level below “ ...
Compressor: Components and Components Location
Components
1. Bolt2. Disc & Hub Assembly 3. Retainer Ring (Pulley)4. Pulley5. Retainer Ring (Field coil)6. Field Coil7. Compressor Assembly
...