Specifications |
Control Pressure kpa (kgf/cm?, psi) | 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) |
Current value(mA) | 50 ~ 850 |
Internal resistance(?) | 5.1 |
PDM Relay Box: Repair procedures
Removal
PDM Relay
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console assembly.
(Refer to BD group - "Console")
3.
Remove the PDM relay box (A) after loosening t ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase. This system supplies fresh
filtered air to the crankcase th ...