Remove the solenoid valve connector (B) and the oil temperature sensor (A).
9.
Remove the valve body assembly (A).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Installation
1.
Install in the reverse order of removal.
•
Adding Automatic Transaxle Fluid(ATF).
(Refer to "Fluid" in Hydraulic System of this group)
•
Perform Transaxle Control Module(TCM) learning after
replacing the valve body to prevent slow transaxle response, jerky
acceleration and jerky startup.
(Refer to "Repair procedures" in Automatic Transaxle Control System of this group)
Description
The valve body is essential to automatic transaxle control
and consists of various valves used to control the oil feed from the oil
pump. Specifically, these valves consist of press ...
Front Bumper: Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
...
Special Service Tools
Special Service Tools
Tool(Number and Name)IllustrationUse09581-11000Piston expanderSpreading the front disc brake piston.
...