1.Set the mode to the position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired speed.
Brake Line: Repair procedures
Removal
1.
Disconnect the brake fiuid level switch connector, and remove the reservoir cap.
2.
Remove the brake fluid from the master cylinder reservoir with a syringe.
&nb ...
Shift Cable: Repair procedures
Inspection
1.
Check the damage and operation of the control cable.
2.
Check the damage of the boot.
3.
Check the damage and corrosion of the bushing.
4.
Check the damage or weakening o ...