Kia Sportage: Windshield Deicer: Repair procedures - Windshield Deicer - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Windshield Deicer: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Windshield Deicer / Windshield Deicer: Repair procedures

Inspection
1.
Remove the cowl top cover.
(Refer to the wiper)
2.
Disconnect the windshield deicer connector (A) from the wiper motor linkage.

3.
Check for continuity between the terminals of deicer lines.

4.
Turn the ignition switch ON and the windshield deicer switch ON, then measure the voltage between the terminals of harness side deicer connector.

OK : approx. Battery voltage (12V)

Description and Operation
Description Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay. Body control module ...

Windshield Deicer Switch: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel. (Refer to BE - "Audio") 3. Remove the heater and A/C controller (A) after disconnecting the con ...

Other Information:

Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many kilometers (miles) you can get from a liter (ga ...

Defogging logic
To reduce the possibility of fogging up the inside of the windshield, the air intake or air conditioning is controlled automatically according to certain conditions such as or position. To canc ...

Categories


Copyright © www.kispmanual.com 2014-2024