Kia Sportage: Automatic climate control system: (if equipped)
Driver’s temperature control knob
Front windscreen defroster button
Rear window defroster button
Infotainment and climate control panel switching button
Air conditioning (A/C) button
Airflow mode selection button
SYNC button
Passenger’s temperature control knob
AUTO (automatic control) button
Air intake control button
Fan speed control button
Rear temperature control button
CAUTION
Operating the blower while the vehicle is in ON can discharge the battery. Use the blower while the engine is running.
![]() |
Operation
Press the button on the switchable controller to move between the infotainment and climate control panels.
Press and hold the button to choose the default panel for the controller.
![]() |
![]() |
Operation
Press the switchable controller button to select the infotainment or climate control panel. The selected panel icon illuminates, and the controls change to that panel.
The knob display illuminates to indicate the selected panel mode.
When the vehicle is in ACC, only the infotainment system is active.
![]() |
Operation
Press and hold the button to set the default mode for the control panel.
After you select a different panel, the controller returns to its default mode after a set period of time.
If the default mode is set to OFF, the controller displays the mode that was used most recently.
![]() |
Operation
Set the cabin temperature you want.
Press AUTO. The Kia Sportage climate control system automatically adjusts these settings to maintain the selected temperature:
Airflow mode
Fan speed
Air intake
Air conditioning
|
Level |
Indicator |
LCD display |
Airflow* |
|---|---|---|---|
|
High |
![]() |
![]() |
2–8 |
|
Medium |
![]() |
![]() |
1–7 |
|
Low |
![]() |
![]() |
1–5 |
NOTE
To exit fully automatic operation, press or adjust one of the following controls:
Fan speed control
Airflow mode selection
Front windscreen defroster. Press the button again to turn off front defrost; AUTO will then appear on the information display again.
The function you select will operate manually, while the remaining climate control functions continue to adjust automatically.
For convenient operation and effective climate control, use AUTO and set the temperature to 22 °C (72 °F).
![]() |
Operation
Turn the temperature control knob left or right to select the desired cabin temperature.
NOTE
Keep the sensor on the instrument panel uncovered so the heating and cooling system can regulate the cabin temperature effectively.
![]() |
Operation
Press SYNC to link the driver’s and front passenger’s temperature settings.
Use the driver’s side temperature control to adjust both sides together.
Operation
On the infotainment system, select Settings > General > Units > Temperature to change the displayed temperature scale.
![]() |
Operation
Press the left or right button to decrease or increase the fan speed.
![]() |
Operation
Press the left knob button, or press the left knob itself, to switch off the blowers.
If the heater or air conditioner is operating and recirculated air remains selected for 30 minutes or longer at a low temperature, the system automatically switches to fresh-air mode. The change depends on the outside temperature.
Setting automatic air ventilation
To enable Auto dehumidify, open the infotainment system settings and select Settings > Vehicle > Climate > Automatic Ventilation > Auto dehumidify.
TIP
For detailed instructions, refer to the Navigation Quick Reference Guide.
Infotainment menus may change after a software update. Check the manual in the infotainment system or the quick reference guide for current instructions.
When the sunroof is opened while the heating or air conditioning system is operating, the air intake automatically changes to outside (fresh) air.
If you select recirculated air while the sunroof is open, the system keeps that setting for 3 minutes before switching automatically to outside (fresh) air.
After the sunroof is closed, the air intake returns to the setting that was selected before the sunroof was opened.
To help prevent washer fluid odour from entering the cabin, the ventilation system temporarily switches to recirculated air when windscreen washer fluid is sprayed.
To enable this feature on the infotainment system, select Settings > Climate > Recirculate Air > Activate upon Washer Fluid Use.
TIP
For detailed instructions, refer to the Navigation Quick Reference Guide.
Infotainment menus may change after a software update. Check the manual in the infotainment system or the quick reference guide for current instructions.
While the vehicle is running, the system automatically adjusts the driver’s seat warmer, seat ventilation and steering wheel heater according to the temperatures inside and outside the Kia Sportage.
After the vehicle is restarted, the steering wheel heater and seat warmer or ventilation are normally off. If the automatic climate-linked controls are enabled, however, these features can switch on or off in response to the interior and exterior temperatures.
Operation
On the infotainment screen, select Settings > Vehicle > Seat > Heating/Ventilation > Auto. Controls That Use Climate Control Settings, then choose Steering wheel warmer or Seat warmer/ventilation.
TIP
For detailed instructions, refer to the Navigation Quick Reference Guide.
Infotainment menus may change after a software update. Check the manual in the infotainment system or the quick reference guide for current instructions.
Opening the tailgate
The tailgate is locked or unlocked when all doors are locked or unlocked
with the key, transmitter (or smart key) or central door lock switch.
If unlocked, the tailgate can be opened by pres ...
Starter Relay: Repair procedures
Inspection
1.
Remove the fuse box cover.
2.
Remove the starter relay (A).
3.
Using an ohmmeter, check that there is continuity between each terminal.
TerminalContinuity30 - 87NO85 - 86Y ...
High beam indicator
This indicator illuminates when the headlights are on and in the high beam position
or when the turn signal lever is pulled into the Flash-to- Pass position. ...