Kia Sportage: Rear View Monitor Malfunction and Limitations
Rear View Monitor Malfunction
If the Rear View Monitor malfunctions, its display may appear green, blue, or black. If the system does not operate
correctly, the screen flickers, or the camera image is unclear or missing, Kia recommends having the Kia Sportage
inspected by an authorised Kia dealer or service partner.
Limitations of the Rear View Monitor
If the Kia Sportage remains stationary for a long time in winter or is parked in an indoor car park, exhaust fumes
may temporarily obscure the camera image.
An abnormal screen may appear, accompanied by a warning icon in the upper-left corner of the infotainment display, in
the following situation:
WARNING
- The wide-rear-view camera does not show the entire area behind the vehicle. Before parking or reversing, check the
surroundings directly using the interior and exterior rear-view mirrors, and look around the vehicle.
- The distance to an object shown on the screen may differ from its actual distance because the Rear View Monitor
image is calibrated from the wide-rear-view camera. If the vehicle is tilted by its cargo load, the rear parking
guidelines may also be inaccurate. Check the area around the vehicle directly before moving.
- Keep the wide-rear-view camera lens clean. Dirt or other foreign material on the lens can reduce camera
performance and prevent the Rear View Monitor from operating correctly. Do not clean the lens with chemical
solvents, including strong alkaline detergents or volatile organic solvents such as petrol or acetone, as these can
damage it.
- Driving with the tailgate open is not recommended. If it is open, take particular care to maintain safety.
Parking/View button
When the gear is in P (Park), press the Parking/View button (1) to switch the Rear View function on or off.
To display ...
The Surround View Monitor can assist with parking and low-speed manoeuvring by showing the area around the Kia
Sportage.
Detecting sensor
For information about the applicable detecting sensors an...
See also:
Instrument panel illumination
When the ignition switch is on, press the illumination control button to adjust
the brightness of the instrument panel illumination. ...
Oil hydraulic Motor(Actuator): Repair procedures
Inspection
If you have trouble code related to the oil hydraulic
motor(actuator) (P1825, P1826, P1827, P1828), check oil hydraulic motor
(actuator) according to the ...
Interior light welcome function
When the interior light switch is in the DOOR position and all doors (and tailgate)
are locked and closed, the room lamp will come on for 30 seconds if any of the below
is performed.
Without s ...