Kia Sportage: Removing and Storing the Spare TyreProcedure
Lift out the luggage board cover to access the spare tyre and its retaining hardware.
![]() |
Turn the tyre hold-down wing bolt counterclockwise to release it. If the bolt is difficult to loosen by hand, use the wheel lug nut wrench to turn it.
![]() |
Use the wheel lug nut wrench to turn the hold-down wing bolt counterclockwise if needed.
Handle the wrench carefully because its edges may be sharp.
After use, return the spare tyre and tools to their storage positions by following the removal steps in reverse order. Secure them properly so they do not rattle while the Kia Sportage is moving.
WARNING
Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, then put a finger ove ...
Replacing license plate lamp (Bulb type). Replacing map lamp (Bulb type)
Replacing license plate lamp (Bulb type)
Procedure
Switch off the vehicle and disconnect the negative battery terminal.
Carefully prise the la ...
Front Bumper: Components and Components Location
Components
1. Front bumper cover2. Front bumper side bracket [LH]3. Front bumper side bracket [RH]
...