Kia Sportage: Using the infotainment/climate switchable controller control panel
|
Operation
Press the button on the switchable controller to change between the infotainment controls and climate controls.
Press and hold the button to set the control panel's default mode.
|
Figure 1. Infotainment control panel
|
Figure 2. Climate control panel
|
Operation
Press the switchable controller button to choose the panel you want to use. The selected panel icon appears, and the controls change to that mode.
The controller knob illumination changes to indicate the selected panel mode.
When the vehicle is in ACC, only the infotainment system is available.
|
Operation
Press and hold the controller button to select the default control panel mode.
After the default is set, the control panel returns to that mode after a certain period, even if you temporarily switch to the other panel.
If the default mode is set to OFF, the panel displays the mode that was used most recently.
Navigation-based Smart Cruise Control limitations
Navigation-based Smart Cruise Control may not operate as intended in the situations listed below. For example,
because the system relies on navigation guidance, it may slow the Kia Sportage if the ...
Safe Use of the Tyre Mobility Kit
Stop the Kia Sportage in a safe, level place away from traffic.
Apply the parking brake.
Use the Tyre Mobility Kit only to seal and inflate passenger-car tyres.
Do not remove foreign obje ...
Crankshaft Position Sensor (CKPS): Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disconnect the battery n ...