Kia Sportage: Vehicle Modifications. Vehicle Break-In Process - IntroductionKia Sportage: Vehicle Modifications. Vehicle Break-In Process

Kia Sportage Owner’s Manual (5th Generation, NQ5; 2022+) / Introduction / Vehicle Modifications. Vehicle Break-In Process

Vehicle Modifications

The Kia Sportage is designed and built to meet specific standards for performance, safety and durability. Do not modify the vehicle without proper authorisation: changes may affect how it drives, reduce its safety or reliability, and may breach applicable government safety or emissions regulations.

NOTE

Damage or performance problems caused by a vehicle modification may not be covered by the warranty.

CAUTION

Unauthorised electronic devices can cause the vehicle to operate abnormally, damage wiring, drain the battery or start a fire. For your safety and to protect the vehicle’s electrical systems, do not use electronic devices that have not been authorised for use.

Vehicle Break-In Process

During the first 1,000 km (600 miles), a few simple precautions can help your Kia Sportage develop its performance, fuel economy and service life. Follow these recommendations while the vehicle is new:

Fuel Requirements
Unleaded Petrol For Europe For the best performance from your Kia Sportage, Kia recommends using unleaded petrol with an octane rating of RON (Research Octane Number) 95 or higher, or AKI (Anti...
Vehicle Handling Instructions. Vehicle Data Collection and Event Data Recorders (EDR)
Vehicle Handling Instructions As with other vehicles of this type, incorrect operation of the Kia Sportage can lead to loss of control, an accident or a rollover. Features such as higher ground cl...
See also:

Head Lamps: Repair procedures
Removal     Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turned off.     ...

Audio Unit: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad passenger''s garnish (A). (Refer to BD group - "Crash pad") 3. Disconnect the connectors and remove the cl ...

Front Impact Sensor (FIS): Components and Components Location
Components ...

Categories

Copyright © www.kispmanual.com 2014-2026 - 0.058