Specifications |
Control Pressure kpa (kgf/cm?, psi) | 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) |
Current value(mA) | 50 ~ 850 |
Internal resistance(?) | 5.1 |
DBC Switch: Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad side switch assembly.
3.
Check the continuity between the switch terminals as ...
High beam indicator
This indicator illuminates when the headlights are on and in the high beam position
or when the turn signal lever is pulled into the Flash-to- Pass position. ...