Park the car and stop the engine. Arm the system as described below.
1.Remove the ignition key from the ignition switch and exit the vehicle.
2.Make sure that all doors (and tailgate) and engine hood are closed and latched.
3.Lock the doors using the transmitter of the keyless entry system (or smart key)
or ignition key.
After completion of the steps above, the hazard warning lights will blink (for smart key, the chime also sounds) once to indicate that the system is armed.
If any door (or tailgate) or engine hood remains open, the hazard warning lights and the chime will not operate and the theft-alarm will not arm. If all doors (and tailgate) and engine hood are closed after the lock button is pressed, the hazard warning lights blink once.
The system can also be armed by locking the doors with the key from the front doors; however, the hazard warning lights will not blink using this method.
✽ NOTICE
The theft-alarm system by the key can be deactivated by an authorized Kia
dealer.
If you want this feature, consult an authorized Kia dealer.
Do not arm the system until all passengers have left the vehicle. If the system is armed while a passenger( s) remains in the vehicle, the alarm may be activated when the remaining passenger(s) leave the vehicle. If any door (or tailgate) or engine hood is opened within 30 seconds after the system enters the armed stage, the system is disarmed to prevent an unnecessary alarm.
Water pump: Components and Components Location
Components
1. Water pump pulley2. Water pump sub assembly3. Water pump gasket4. Water pump cover5. Water pump cover gasket6. O-ring7. Water inlet pipe8. Water temperature control assembly9. ...
Output Speed Sensor: Description and Operation
Description
The Output Speed Sensor is a vital unit that measures the
rate of rotation of the transmission''s turbine shaft and output shaft,
and delivers the readings to the TCM. ...