Kia Sportage: Automatic transaxle
Good driving practices
Automatic transaxle operationBlower Resistor: Repair procedures
Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
measured resistance is not within specification, the blower resistor must be replaced. (After removing the resi ...
License Lamps: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lens (A) and license lamp (B) after loosening 2 screws.
Installation
1.
Install the bulb.
2.
Install the license ...