Kia Sportage: Drive mode integrated control system. DRIVE MODE - Driving your vehicleKia Sportage: Drive mode integrated control system. DRIVE MODE

Kia Sportage Owner’s Manual (5th Generation, NQ5; 2022+) / Driving your vehicle / Drive mode integrated control system. DRIVE MODE

DRIVE MODE

Kia Sportage DRIVE MODE control button

Operation

Mode

Characteristics

ECO

Optimises the vehicle’s settings to support fuel-efficient driving.

NORMAL

Provides smooth driving and a comfortable ride.

SPORT

Provides a sportier, firmer driving experience.

SNOW

Supports stable driving on snow-covered roads.

MY DRIVE

Selects a driving mode suited to your driving habits.

TIP

NOTE

ECO mode

NOTE

Fuel efficiency depends on driving style and road conditions.

NORMAL mode

SPORT mode

NOTE

Fuel efficiency may decrease in SPORT mode.

SNOW mode

MY DRIVE mode

In MY DRIVE mode, you can select and combine individual settings on the infotainment system screen.

NOTE

The infotainment system may change after a software update. For current instructions, refer to the manual available in the infotainment system or the quick reference guide.

Crosswind Stability Control (CSC). Electronic Control Suspension (ECS): (if equipped)
Crosswind Stability Control (CSC) Crosswind Stability Control (CSC) works with ESC and Motor Driven Power Steering (MDPS) to help stabilise the vehicle if a strong crosswind causes it to sway or lo...
All Wheel Drive (AWD) system: (if equipped)
The All Wheel Drive (AWD) system can deliver engine power to both the front and rear wheels to help maximise traction. AWD is useful when additional traction is needed, such as on slippery, muddy,...
See also:

Door ajar warning light
This warning light illuminates when a door is not closed securely with the ignition switch in any position. ...

To set cruise control speed
1.Push the cruise ON-OFF button on the steering wheel, to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2.Accelerate to the desired speed, which must b ...

Heated Oxygen Sensor (HO2S): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. 4. Measure resistance between the HO2S t ...

Categories

Copyright © www.kispmanual.com 2014-2026 - 0.0481