Kia Sportage: High Mounted stop lamp: Repair procedures

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Lighting System / High Mounted stop lamp: Repair procedures

Removal

High Mounted Stop Lamp

1.	Disconnect the negative (-) battery terminal.

2.	Remove the tailgate trim. (Refer to the BD group - "Tailgate")

3.	Remove the spoiler. (Refer to the BD group - "Tailgate")

4.	Remove the high mounted stop lamp assembly (B) after disconnecting the connector (A).

Installation

1.	Install the high mounted stop lamp and washer nozzle.

2.	Install the spoiler and tailgate trim.

License Lamps: Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the lens (A) and license lamp (B) after loosening 2 screws. Installation 1. Install the bulb. 2. Install the license ...

Luggage Room Lamp: Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver. 3. Remove the luggage room lamp bulb in ca ...

Other Information:

Rail Pressure Sensor (RPS): Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ConditionOutput Voltage (V)Idle Approx. 1.21, ...

Starter: Components and Components Location
Components 1. Front housing2. Starter solenoid assembly3. Lever4. Lever packing5. Planet shaft assembly6. Planetary gear assembly7. Packing8. Shield9. Amature assembly10. Brush holder assembly11. ...

Kia Sportage: High Mounted stop lamp: Repair procedures

License Lamps: Repair procedures

Luggage Room Lamp: Repair procedures

Other Information:

Categories