Kia Sportage: Integrated Memory System: (if equipped)
|
Operation
Adjust the following Kia Sportage settings to your preferred positions:
Driver’s seat position
Outside rearview mirror positions
Head-Up Display (HUD) position
Press and hold memory button 1 or 2 for about one second to save the settings.
The system sounds two beeps to confirm that the position has been stored.
TIP
The vehicle must be in the ON position to save a memory setting.
Operation
Press memory button 1 or 2 to select the stored position.
The system sounds one chime.
The stored seat, mirror and Head-Up Display positions then move to their saved settings.
Non-operating conditions
The memory position cannot be recalled while the vehicle is travelling faster than 3 km/h (2 mph).
Operation
Make sure the vehicle is in the ON position.
Move the driver’s seat as far forward as it will go.
Move the seatback to its fully upright position.
Press and hold memory button 1 and the seat-forward switch at the same time for about two seconds.
Initialisation
Open the driver’s door to begin the initialisation process.
The driver’s seat and seatback move backwards while the system sounds a continuous beep.
The seat and seatback then move to the centre position, and the beeping stops when the process is complete.
Operating conditions
The driver’s seat moves backward when both of these conditions are met:
The vehicle is in the OFF position.
The driver’s door is opened.
The driver’s seat moves forward when both of these conditions are met:
The vehicle is in the ACC or ON position.
You have the smart key with you and close the driver’s door.
TIP
You can switch the easy access function on or off in the settings menu. Menu names may change after an infotainment system software update; consult the manual available in the system or the quick reference guide for current instructions.
WARNING
Never use the Integrated Memory System while the Kia Sportage is moving. Adjusting a stored position while driving could distract you or affect your control of the vehicle, potentially causing a collision, serious injury or property damage.
NOTE
Disconnecting the battery erases the stored memory settings.
If the Integrated Memory System does not work normally, have it inspected by an authorised Kia dealer or service partner.
Power Door Mirror Switch: Schematic Diagrams
Circuit Diagram
...
Owner Maintenance. Owner Maintenance Schedule
Owner Maintenance Schedule
When You Stop for Fuel
Check the coolant level in the coolant reservoir.
Check the windscreen washer fluid level.
Check the tyres for low pressure or underinflat ...
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be in
your vehicle and vehicle c ...