Kia Sportage: Telemetics Unit (TMU): Repair procedures

Third generation SL (2010â€“2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / MTS System / Telemetics Unit (TMU): Repair procedures

Removal

â€¢	Take care not to scratch the crash pad and related parts.

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad garnish (A) after loosening the screw.

3.	Remove the MTS unit (A) after loosening the mounting bolts.

Installation

1.	Install the MTS unit.

2.	Install the crash pad garnish.

3.	Connect the negative (-) battery terminal.

Inspection

1.	After replacing the TMU unit, access Dealer Engineering Mode in head unit. (Refer to MTS system - "TMU Dealer Engineering Mode")

2.	Check the TMU version ("App S/W") from the head unit screen. [Audio type] [AVN type]

3.	Check the H/U Type from the head unit screen. [Audio type] [AVN type]

4.	Check the Model from the head unit screen. [Audio type] [AVN type]

Telemetics Unit (TMU): Components and Components Location

Component Connector Pin Specification No.Pin NameTypeFromToDescription (Wiring Spec.)1GNDDC GroundTMUBatteryConnected to battery ground2GNDDC GroundTMUBatteryConnected to battery ground3-----4-- ...

Smart key System

...

Other Information:

Instrument Cluster: Schematic Diagrams
Circuit Diagram (1) Circuit Diagram (2) CLU1 message signal flow (B > C CAN gateway) CLU2 message signal flow (B > C CAN gateway) CLU message 1 signal flow (C > B CAN gateway) CLU message 3 signa ...

Trailing Arm: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage to the hub bol ...

Kia Sportage: Telemetics Unit (TMU): Repair procedures

Telemetics Unit (TMU): Components and Components Location

Smart key System

Other Information:

Categories