Kia Sportage: Rear Glass Defogger Switch: Repair procedures| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the center fascia panel.
(Refer to BE - "Audio") |
| 3. |
Remove the heater and A/C controller (A) after disconnecting the connector (B).
|
| Installation |
| 1. |
Install the heater and A/C controller. |
| 2. |
Install the center fascia panel. |
| Inspection |
| 1. |
The rear glass defogger switch inputs can be checked using the GDS. |
| 2. |
To check the input value of rear glass defogger switch, select option "BCM". |
| 3. |
Select option "Current Data".
|
| 4. |
To check the input value of rear glass defogger switch in force mode, select option.
|
Rear Glass Defogger Printed Heater: Repair proceduresElectric Waste Gate Actuator (EWGA): Description and Operation
Desrcription
The Electric WGT Control Actuator is installed on the turbocharger.
It operates the vain in the Waste Gate Turbocharger (WGT) and
regulates the compressed air amount by the ECM''s P ...
Line Pressure Control Solenoid Valve: Specifications
Specifications
Direct control VFS[LINE Pressure]
? Control type : Normal high type
Control Pressure kpa (kgf/cm?, psi)500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Inter ...