1.Set the mode to the position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired speed.
Blower Motor: Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor is not operating when voltage is applied,
substitute with a known-good blower motor and ...
Tilting the sunroof
Before opening or closing the sunroof, open the roller blind (refer to the following
page for instructions on how to use the roller blind).
To open the sunroof, push the sunroof control lever upw ...