Kia Sportage: SS-B Solenoid Valve(ON/OFF): Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: SS-B Solenoid Valve(ON/OFF): Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-B Solenoid Valve(ON/OFF): Description and Operation

Description
SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.
SS-B Solenoid valve(ON/OFF) is installed at valve body.

SS-A Solenoid Valve(ON/OFF): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

SS-B Solenoid Valve(ON/OFF): Specifications
Specifications ON/OFF Solenoid Valve(SS-B) ? Control type : Normal low type Control pressure kpa (kgf/cm?, psi)490.33(5.0, 71.12) Internal resistance(?)10 ~ 11 ...

Other Information:

Crankshaft Position Sensor (CKPS): Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negat ...

Inhibitor Switch: Schematic Diagrams
Circuit Diagram ...

Categories


Copyright © www.kispmanual.com 2014-2025