Inspection |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Remove the crash pad side switch assembly. |
3. |
Check the continuity between the switch terminals as the DBC switch is engaged. |
Blower Unit: Components and Components Location
Component Location
Components
1. Intake case (LH)2. Intake case (RH)3. Blower motor4. Intake door5. Intake actuator6. Mofet [Auto type]7. Resistor [Manual type]8. Climate control air filter cove ...
Seat belt restraint system
For maximum restraint system protection, the seat belts must always be used
whenever the vehicle is moving. A properly positioned shoulder belt should be
positioned midway over your shoulder ...