Sunvisor Replacement
•
Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
•
Put on gloves to protect your hands.
1.
After loosening the mounting screws, then remove the sunvisor (A) and retainer (B).
2.
Installation is the reverse of removal.
Assist Handle Replacement
•
Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
•
Put on gloves to protect your hands.
1.
Remove the covers (A).
2.
After loosening the mounting screws, then remove the assist handle (B).
3.
Installation is the reverse of removal.
Overhead Console Replacement
•
Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
•
Put on gloves to protect your hands.
1.
After loosening the mounting screws, then remove the overhead console assembly (A).
2.
Disconnect the connectors (A).
3.
Installation is the reverse of removal.
•
Make sure the connector is connected properly.
Room Lamp Replacement
•
Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the room lamp cover (B).
2.
After loosening the mounting screws, then remove the room lamp (A).
3.
Disconnect the connector (A).
4.
Installation is the reverse of removal.
•
Make sure the connectors are plugged in properly.
Vanity Lamp Replacement
•
Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the vanity lamp (A).
2.
Disconnect the connector (B).
3.
Installation is the reverse of removal.
•
Make sure the connector is connected properly.
Roof Trim Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put on gloves to protect your hands.
1.
Remove the following items.
•
Front seat
(Refer to the BD group - "Front Seat")
•
Rear seat
(Refer to the BD group - "Rear Seat")
•
Front pillar trim
(Refer to the BD group - " Interior Trim")
•
Front door scuff trim & Rear door scuff trim
(Refer to the BD group - " Interior Trim")
•
Center pillar lower trim & Center pillar upper trim
(Refer to the BD group - " Interior Trim")
•
Rear pillar trim
(Refer to the BD group - " Interior Trim")
2.
Remove the ECM mirror cover (A).
3.
Disconnect the ECM mirror connector (B).
4.
Remove the rain sensor cover (A).
5.
Disconnect the rain sensor connector (B).
6.
Disconnect the roof trim main connector (A).
[Driver''s]
[Passenger''s]
7.
Disconnect the antenna connector (A).
8.
Remove the clips and roof trim (A).
9.
Installation is the reverse of removal.
•
Make sure the connectors are plugged in properly.
•
Replace any damage clips.
Components
1. Roof trim2. Sunvisor [Driver''s]3. Sunvisor [Passenger''s]
Components [Panoramaroof]
1. Roof trim2. Sunvisor [Driver''s]3. Sunvisor [Passenger''s]
...
Components
1. Front pillar trim2. Center pillar upper trim3. Center pillar lower trim4. Luggage side trim5. Cowl side trim6. Front door scuff trim7. Rear door scuff trim8. Front step trim9. Rear ...
Other Information: Driving off-road
Room lamp
Kia Sportage: Roof Trim: Repair procedures
Roof Trim: Components and Components Location
Interior Trim: Components and Components Location