: The lamp will turn on if this
button is pressed.
: The lamp will turn off if this
button is pressed.
✽ NOTICE
Turn off the lamp before return the sunvisor to its original position.
Canister Close Valve (CCV): Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
Electric Waste Gate Actuator (EWGA): Components and Components Location
Components
1 . Housing2 . Cover 3. Sealing Cover4 . Motor5. Pinion6 . Shaft Gear7 . PCB Assembly8 . Middle Gear9 . Lever10 . Lever Pin11 . Rod - End12 . Rod
...