Kia Sportage: A/C Pressure Transducer: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / A/C Pressure Transducer: Components and Components Location

Receiver-Drier: Repair procedures

Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 20~25N.m (2.0~2.5kgf.m, 14.5~18.2lb-ft) 2. Remove the ...

A/C Pressure Transducer: Description and Operation

Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after it is measured. By voltage value, the engine ECU controls cooling fan by operating ...

Other Information:

Rear Driveshaft: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.3 ~ 1 ...

Rear Seat: Components and Components Location
Components 1. Headrest2. Headrest guide3. Tether anchor garnish4. Upper bezel5. Rear seat back pad6. Latch cover7. Rear seat back cover8. Armrest board9. Rear armrest10. Rear seat back frame11.Re ...