Kia Sportage: Anchor Pretensioner: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Restraint / Seat Belt Pretensioner / Anchor Pretensioner: Description and Operation
| Description |
Anchor pretensioner operates as well as belt Pretensioner at
the same time If it gets into its deploy condition after a collision. It
is located at near anchor on front seat and it is an equipment to make
up for the existing short stroke. Anchor pretensioner is supported by
two cables and it is an auxiliary equipment to prevent a driver from
breaking away doubly as seat belt is being pulled toward anchor side
after a collision.
Never measure resistance of anchor pretensioner directly, current of measuring device may cause unexpected airbag deploy. |
Seat Belt Pretensioner (BPT): Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work.
2.
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pi ...
Anchor Pretensioner: Components and Components Location
Components
...
Other Information:
Infant or small child
You should be aware of the specific requirements in your country. Child and/or
infant seats must be properly placed and installed in the rear seat. For more information
about the use of these rest ...
Yaw-rate and Lateral G Sensor: Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console upper cover.
3.
Disconnect the yaw rate & lateral & Longitudinal G se ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright www.kispmanual.com 2014-2026