Turn Signal Lamp: Repair procedures
Removal
Rear Turn Signal Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper.
(Refer to BD group - "Rear Bumper")
3.
Disconnect the connector. Remove the rear ...
Alternator: Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal first, then the positive terminal.
Tightening torque :
(+) terminal : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
(-) te ...