Kia Sportage: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Multifunction switch / Components and Components Location

Specifications

Specifications ItemsSpecificationsRated voltageDC 12VOperating temperature range -22 ~ +176°F (-30°C ~ +80°C)Rated loadDimmer & passingswitchHigh : 0.2A (Relay load)Low : 0.2A (Relay load)Pas ...

Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A) after removing 3 screws.     Take care not to damag ...

Other Information:

Headlight escort function
The headlights (and/or taillights) remain on for approximately 5 minutes after the ignition key is removed or turned to the ACC or LOCK position. However, if the driver’s door (and tailgate) is op ...

Rail Pressure Sensor (RPS): Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ConditionOutput Voltage (V)Idle Approx. 1.21, ...