Kia Sportage: Fob Holder: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Button Engine Start System / Fob Holder: Components and Components Location

Start/Stop Button: Repair procedures

Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the cluster fascia panel. (Refer to the BD group - "Crash pad") 3. Disconnect the connector (A). 4. Remove the start ...

Fob Holder: Repair procedures

Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the floor console. (Refer to the BD group - "Console") 3. Disconnect the connector (B), then remove the fob holder assemb ...

Other Information:

Ventilation
1.Set the mode to the position. 2.Set the air intake control to the outside (fresh) air position. 3.Set the temperature control to the desired position. 4.Set the fan speed control to the desired ...

CVVT Oil Temperature Sensor (OTS): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OTS connector. 3. Remove the OTS. 4. After immersing the thermistor of the sensor into engine coolant, measure resistance ...